Mikes Carburetor Parts
  • BY CARB TYPE
    • AISAN
    • CARTER
    • EDELBROCK
    • FORD, AUTOLITE, MOTORCRAFT
    • HITACHI
    • HOLLEY
    • JOHNSON OUTBOARD
    • KEIHIN
    • MARVEL SCHEBLER
    • MERCARB
    • MIKUNI
    • NIKKI
    • ROCHESTER
    • SOLEX
    • STROMBERG
    • SU
    • WEBER
    • ZENITH
  • GENERAL TROUBLESHOOTING
    • FLOODING
    • PERCOLATION
  • FAQs
  • INJECTORS
    • TECHNICAL
    • INJECTOR CLEANING
    • KITS AND PARTS
    • MAKE AND MODEL
  • PURCHASE PARTS
    • COMPONENT CATALOG
    • CARBURETORS
  • MANUALS
  • BLOG
  1. Home
  2. Knowledge Base
  3. Carter
  4. AFB
  5. AFB Tips & Technical
Searching...

AFB Tips & Technical

  • AFB & AVS Mounting Gasket

    What Does The Mounting Gasket Need To Cover?Here is an example of a 9000 series AFB carburetor base, which illustrates...
  • AFB Adjusting Idle Mixture

    How to Adjust Your Idle MixtureThere is no exact adjustment of the idle mixture screws while the carburetor is on...
  • AFB Float Adjustment

    Float AlignmentLook down the edge of the float to make sure it is parallel with the edge of the float...
  • AFB Jets & Metering Rods

    I get a lot of questions about the AFB and how the jets and metering rods are related, so here...
  • Carter AFB – Which Filter?

    Most Carter AFB’s use the wire mesh fuel filter like #53 in the illustration, but not all. Take a look...
  • Carter AFB Steel Baffle

    When installing the AFB carburetor on the 327 cubic inch high performance engine it is extremely important to position the...
  • Installing AFB Throttle Valves

    Before removing screws use a dremmel tool to grind the threaded end off. These screws are usually mushroomed over and...
Need Support?
Can't find the answer you're looking for?
Contact Support
© Copyright Mikes Carburetor Parts.
  • BY CARB TYPE
  • GENERAL TROUBLESHOOTING
  • FAQs
  • INJECTORS
  • PURCHASE PARTS
  • MANUALS
  • BLOG