Carter RBS

Fuel for most part throttle and full throttle operation is supplied through the high-speed circuit. As intake manifold vacuum is...

Many carbruetor models use an idle solenoid to prevent “dieseling” or “after-run”. Many things that have been done to lower...

The RBS (round bowl single) carburetor is made up of a single aluminum casting with pressed steel fuel bowl. Fuel...

When you don’t have a carburetor number match your old accelerator pump with the 3 pumps above to determine the...

The float assembly in the RBS is compact for extreme rigidity assuring little or no change in float setting due...

The accelerating pump circuit provides the measured amount of fuel necessary to assure smooth engine performance during acceleration at lower...

The automatic choke provides the correct mixture necessary for quick cold engine starting and proper warm-up performance. When the engine...

Some applications use a slow closing throttle device known as a dashpot. They are used to delay or slow the...

Fuel for idle and the early part of throttle operation is metered through the low-speed circuit. The low-speed jet is...

Some units use a well jet in addition to the step-up rod jet. The well jet is located in the...