Carter Thermoquad 4 Barrel Accelerator Pump
Hesitation, or bog can be caused by miss adjusted linkage. Be sure to follow all of the adjustment procedures. Correct...
- Home
- Knowledge Base
- Carter
- Carter Thermoquad
Carter Thermoquad
-
-
Carter Thermoquad Adjustments
How To Adjust the Float With bowl cover inverted, gasket installed, and floats resting on the seated needle, measure distance... -
Carter Thermoquad Choke System
Choke PullOff Linkage PullOff Linkage Spring Fast Idle Cam -
Carter Thermoquad Float System
Check the float height (brass, or nitrophyl) by turning the bowl cover upside down so the floats rest on the... -
Carter Thermoquad Metering Rods
The TQ or Thermoquad operates the metering rods principally mechanically, then as the secondaries are opened, by vacuum. The step... -
Carter Thermoquad Secondary
Open throttle valves to the wide open position. The primary & secondary throttle shafts stops, should contact the casting at... -
Carter Thermoquad Specifications
MAKE YEAR MODEL CARB NUM CHRYSLER 1973 340 EXC CALIF M/T 6318S CHRYSLER 1973 340 EXC CALIF A/T 6319S CHRYSLER... -
Carter Thermoquad Troubleshooting
Dies at a Stop Your Thermaquad TQ dies when hot and comes to a stop. The Carter Thermaquad was Carter’s... -
Carter Thermoquad, TQ Identification
Carter Thermoquad Carburetor Manual The carburetor number can be found stamped on the mounting flange face. Numbers like 6-2124 are...
Need Support?
Can't find the answer you're looking for?
Contact Support