Carter W-1 1 Barrel Accelerator Pump
Is there a washer of some kind in the bottom of the accelerator pump well? Yes, it is used to...
- Home
- Knowledge Base
- Carter
- Carter W-1
Carter W-1
-
-
Carter W-1 Build Sheets
1932-34 CHEVROLET 212S, 235S, 222S, 259S, 260S, 284S, 285S. 284S 284S 1933-35 PONTIAC 255S, 266S, 280S, 283S, 298S, 306S, 314S,... -
Carter W-1 Carburetor Identification
Carter W-1 Identification.The Carter W-1 used a tag attached to the top of the carburetor. The carburetor number would be... -
Carter W-1 Choke Circuit
This circuit is used only in starting and warming a motor, its purpose being to supply a rich_ mixture for... -
Carter W-1 Float Circuit
A float with needle and seat automatically controls the inflow of gasoline. The high speed metering jet gives a much... -
Carter W-1 High Speed Circuit
The intermediate speed and high speed circuit consists of the Metering Rod (M), Metering Jet (N), Nozzle (0), and gasket,... -
Carter W-1 Low Speed
The Idle or Low Speed Circuit completely controls the supply of gasoline to the engine during idle and light-load speeds... -
Carter W-1 Specifications
A – 0D106, B – 0D86 -
Carter W-1, 1 Barrel Carburetor Jets
Jets are not normally replaced as they do not wear out. You change jets with altitude changes or engine changes... -
Carter W-1, 1 Barrel Troubleshooting
Carter W-1, 1 Barrel Downdraft Carburetor Questions & Answers. As questions are posted about Carter W-1 problems, the question and... -
How To Install a Carter W-1 Metering Rod Spring
Most Carter 1 barrel carburetors use a metering rod spring to keep the metering rod in place. Below is a video which...