Carter WA-1

Float Level With bowl cover assembly inverted and float resting on pin in seated needle, the vertical distance from the...

Orientation of the Main Nozzle The flat on the discharge end of the nozzle indexes to a flat side inside...

WA-1 Leaks Out the Throttle Shaft This could be cause by a couple of things. The carburetor could be percolating....

FLANGE FLOAT GAS LINE FITTING 1 1/4 7/16 5/16 ELBOW

Identification – when no tag is present. You can sometimes identify a WA-1 carburetor using the casting number, which is...

How the Metering Rod Work The metering rods work to restrict, or allow more fuel through the main jets. At...