Rebuilding (Marvel Schebler)

FLOAT LEVEL TSX float level – 1/4″ measured from the gasket to the nearest surface of the float. PRELIMINARY ADJUSTMENTSSet...

Preliminary adjustments Set speed control lever so that throttle valve is open slightly. Make certain that fuel supply to carburetor...

Main Jet – Not all Marvel Scheblers use a main jet, even if a main adjusting needle is used. Installing...

1 Body Assembly 37 Seat Power Adjusting Needle 2 Lever Assy Throttle 38 Needle Idle Adjusting 3 Throttle Shaft, Stop,...

1 Body Assembly 38 Needle Idle Adjusting 2 Lever Assy Throttle 39 Needle Assy Power Adjusting 3 Throttle Shaft, Stop,...

1 Body Assembly 38 Needle Assy Power Adjusting 2 Lever Throttle, Loose 39 Packing Throttle Shaft 3 Shaft Stop &...