Weber Marine

(a) illustrates the main discharge hole. This hole will either have a ball and weight, or a ball and spring....

Measure the float level from the bottom side of carburetor top (w/gasket) to toe of float. Adjust by bending the flat hinge...

Primary jets are larger than the secondary jets. Change the secondary jet when adjusting for altitude. Some carburetors may have...

Pink – 7 HGGreen/Plain – 8 HG Float level – 1 9/32″ Float Drop – 2″ Float bowl screws are...

Weber marine runs rich or Floods The first thing you want to do is test the needle & seat for...