1. Home
  2. Knowledge Base
  3. Keihin
  4. How To Test Keihin Fuel Pump

How To Test Keihin Fuel Pump

The proper pressure of the fuel pump is necessary to carry the correct amount of fuel from the gas tank to the carburetor.

  • Relieve the fuel pressure from the system.
  • Disconnect the fuel line at the fuel filter and attach the pressure gauge to it.
  • Remove the fuel cut off relay from the fuse box and connect a jumper wire in its place. Turn the ignition switch on until the pressure stabilizes. The pressure should be 2.6-3.3 psi.
  • Check for kinked or pinched fuel line from the gas tank to the fuel pump.
Keihin Carburetor Kits
Updated on 08/10/2021

Was this article helpful?

Related Articles

Need Support?
Can't find the answer you're looking for?
Contact Support