Carter WCD Adjustments
WCD Starter Adjustmernt If carburetor is installed on a Dynaflow car, make certain that throttle linkage and dash pot are...
- Home
- Knowledge Base
- Carter
- Carter WCD
Carter WCD
-
-
Carter WCD Carburetor Float
Float Circuit The float circuit maintains an adequate supply of fuel at the proper level in the carburetor bowl for... -
Carter WCD Idle Circuit
Fuel for idle and early part throttle mixtures is metered through the low speed, or idle circuit. Gas enters the... -
Carter WCD Metering Rod Adjustment
Metering Rod Adjustment Set the metering rod adjustment after setting the pump adjustment. Back out throttle lever set screw to... -
Carter WCD Specifications
MAKE YEAR MODEL CARB NUMBER RAMBLER 1961 6110 3169S RAMBLER 1968 232 REBEL, AMBASSADOR, AMERICAN RHD S/T 4410S RAMBLER 1968...
Need Support?
Can't find the answer you're looking for?
Contact Support