• Holley 94, 2100, 2110, AA-1 Carburetor Tips

    • 04/07/2021
    • Mike

    Idle mixture screw with bent, or grooved tips should be replaced Double or triple carburetor will use power valve with lower HG. 2.5, or 3.5. Need a New Check Weight?

  • Mercarb Rebuild

    • 04/06/2021
    • Mike

    Dis Assembly Remove the choke thermostat (3 screws). Remove the lever attached to the choke shaft. Be careful, this screw is easily broken. The housing is attached to the main body with 2 screws, which you need to remove. Remove the gasket. Remove the 8 screw from the top of…

  • Solex 28 & 30 PICT Rebuild Tips

    • 04/04/2021
    • Mike

    Take plenty of digital pictures as you dis assemble your carburetor. You may need to refer back. Soak your carburetor parts in a suitable carburetor cleaner. Be sure to follow manufactures instructions. Some cleaners will discolor your carburetor if left too long. A toothbrush works well for removing carbon deposits….

  • Do you have a physical location?

    • 03/30/2021
    • Mike

    Yes, our sales counter is located at: 438 N Market Blvd Chehalis, WA. 98532Sales counter hours: M-F 7-4 PSTPhone: 888 689-9758 M-F 7-4 PST (order inquiries only, all tech questions must be submitted via email)Email: sales@MikesCarb.com (for all inquiries) Holiday closures: New Year’s Eve/New Year’s Day Memorial Day 4th of…

  • Motorcraft 2150 Identification

    • 03/24/2021
    • Mike

    The Motorcraft 2150 was produced from 1973 to 1983. The 2150 came out in response to the newer smog controls put in place in the early 70’s. You will find the 2150, 2 barrel a bit more complicated than the older 2100, 2 barrel. When the tag is missing there…

  • Motorcraft 2150 Tips

    • Mike

    Gas sitting for months at a time will turn and coat the inside of the carburetor with varnish. You would be able to smell varnish. If this is the case, a good cleaning of the carburetor, gas tank and fuel line is required. Nitrophyl and brass floats are measured the…

  • Carter YF & YFA Jet Sizes

    • Mike

    Carter Jet Number to Size Conversion With no carb number you will need to measure what is in the carburetor now. CARB NUM CFM PRIMARY JET SECONDARY JET METERING ROD SIZE 2008S 0935 .073 na 2014S 0 .102 na .078 X .07325 X .047 2071S .098 na na 2100S .086…

  • Motorcraft 2100 Tips

    • 03/19/2021
    • Mike

    Includes helpful tips about your 2100 carburetor. Use one in-line fuel filter. Adding more filters might keep some of the crud out but at the same time will restrict fuel float. Keep WD40 away from your carburetor. We don’t have scientific evidence but suspect it reacts with ethanol fuel. We…

Prev Next